Mac Device Driver And Software Installation; Orb Tools For Mac - ORB SCSI INTERNAL Owner's Manual

Make Non-Removable: Allows the user to set the ORB drive as a
fixed drive.

1.13 MAC DEVICE DRIVER AND SOFTWARE INSTALLATION

The ORB SCSI driver has to be installed before Mac OS is able to mount your ORB
SCSI Drive. This will also install ORB Tools for Mac on your system. Make sure you
are running Mac OS 7.6.1 to 9.0 on a Power Mac/Power PC, G3 or a G4.
Close all open applications and disable virus protection before
proceeding further.
1. Insert the ORB Installation CD into your CD-ROM drive.
2. Launch the installation by doing the following:
• double-click on the CD-ROM icon
• double-click on the MAC folder
• double-click on the file called ORB Tools Installer.
3. To install your ORB SCSI device driver, follow the instructions displayed.
4. The installer will ask you to restart the system to correctly install the
ORB SCSI device driver. Then your ORB SCSI Drive should appear as
an ORB Drive icon on the desktop.
5. If the ORB disk is PC formatted, you have the option to re-format it to Mac
format through the Mac OS or ORB Tools for Macintosh.
!
PROBLEM! If you can not see or access your ORB SCSI Drive,
refer to Section 3, Troubleshooting.
Congratulations! Your ORB Drive is ready to use.

1.14 ORB TOOLS FOR MAC

ORB Tools for Mac is a suite of utilities included on the ORB Installation Suite CD
supplied with your new ORB Drive that expand its functionality.
Scan Devices:
Performs a full system scan for ORB Drives
and identifies each drive's system interface.
13