Orb Tools And Backup Utility Software For Pc - ORB SCSI INTERNAL Owner's Manual

If the drive is not detected, or your system hangs during the bootup process, you
may have to access your SCSI host bus adapter's setup utility program.
You may need to refer to your SCSI host bus adapter's manual for information
about how the SCSI setup utility program works.
3. Your Operating System should be loaded.
If you are using Windows 2000/98/95/NT proceed to Section 1.12, ORB Tools and
Backup Utility for PC.
Congratulations! Your ORB Drive is ready to use.
If you are installing the drive in a Macintosh computer with Mac OS 7.6.1 to OS 9.0,
proceed to Section 1.13, Mac Device Driver and Software Installation on page 13.
1.12 ORB TOOLS AND BACKUP UTILITY
SOFTWARE FOR PC
The ORB Installation Suite CD is used to install the ORB Tools when you are run-
ning Windows 2000/98/95/NT.
ORB Tools does not support Windows 3.1x, DOS, OS/2 or other operating systems.
Software Setup - Windows 2000/98/95/NT
1. Insert the ORB Installation Suite CD into your CD-ROM drive.
2. To install ORB Tools, click on the Install ORB Tools option in the window that
just opened.
• If no window opens up when your CD-ROM is ready, double-click on My
Computer on the Windows desktop.
• Double-click on the drive icon for the CD-ROM.
• In the window that just opened, double-click on the file named Setup
(setup.exe) to initiate the installation procedure.
3. You will be prompted for information as the installation proceeds. Follow the
instructions on the screen.
4. The ORB Tools installation is complete after Windows has restarted.
10