Magnavox TB100MW9 Owner's Manual page 14

Initial Setup (Setup Wizard)
4 Select "CONTINUE" using [ s / B ],
then press [OK].
Seleccione "CONTINÚE" utilizando [s / B] y presione
[OK].
This SETUP WIZARD will help you with the initial
setup on your own.
"CONTINUE": To continue setup
"CANCEL ": To cancel to leave pre-arranged
setup
CANCEL
5 Select the language using [ K / L ],
then press [OK].
Seleccione el idioma utilizando [K / L] y presione [OK].
ENGLISH Select the language for setup display.
ESPAÑOL Elija idioma de preparación.
FRANÇAIS Sélectionner langue écran config.
6 Select the connection for audio
output using [ s / B ], then press [OK].
Seleccione la conexión para salida de audio mediante
[s / B] y luego presione [OK].
Select the connection for Audio output.
AUDIO OUT : Connecting STB and TV via AUDIO
Cable
RF OUT : Connecting STB and TV via RF
Cable
AUDIO OUT
Select "AUDIO OUT" if...
- you are using the standard audio cable to
connect the STB to your TV. (Connection
on pages 10 and 11.)
C
Seleccione "AUDIO FUERA" si...
- está utilizando el cable de audio normal para
conectar el STB a su TV. (conexión B o C en las
páginas 10 y 11.)
Select "RF OUT" if...
- you are using the RF cable to connect the STB
to your TV. (Connection
and 12.)
Seleccione "RF FUERA" si...
- está utilizando el cable RF para conectar el STB a su
TV. (conexión A o D en las páginas 10 y 12.)
7 Select your time zone using [ K / L ],
then press [OK].
Seleccione su huso horario con [K / L] y presione [OK].
Select Time Zone.
ATLANTIC
EASTERN
CENTRAL
MOUNTAIN
PACIFIC
ALASKA
HAWAII
CONTINUE
RF OUT
or
B
or on pages 10
A D
14
EN
8 Select "ON" or "OFF" for Daylight
Saving Time (D.S.T) using [ s / B ],
then press [OK].
Seleccione "ON" u "OFF" para la hora de verano. (D.S.T)
utilizando [s / B] y presione [OK].
Select Daylight Saving Time.
NOTE:
2:00AM of the second Sunday in
March until 2:00AM of the first
Sunday in November.
ON
9 Select the desired display mode
using [ K / L ], then press [OK] (refer
to page 20).
Seleccione el modo de indicación deseado utilizando
[K / L] y presione [OK].
Select display mode.
LETTERBOX
ZOOM
FULL
10 Select "AUTOSCAN" using [ K / L ],
then press [OK].
Seleccione "AUTOEXPLO. " mediante [K / L] y luego
presione [OK].
AUTOSCAN will rescan all channels.
This may take a while to complete.
EXIT
AUTOSCAN
•
STB starts receiving available digital channels
and stores them in the channel map.
•
When the scanning is complete,
"AUTOSCAN COMPLETED" will be indicated.
•
After autoscan is complete, use [CH K / L]
to verify whether STB is receiving channels
properly.
The "SETUP WIZARD" is now complete.
El "ASISTENTE DE PREP." ahora ha fi nalizado.
To cancel during scanning:
Press [SETUP] or [OK].
Para cancelar durante la exploración: Presione [SETUP] o [OK].
•
If autoscan is canceled, some channels not yet
scanned may not be received. We recommend
completing autoscan.
•
You can do autoscan and adding / deleting
channel later. Refer to page 18.
OFF
The system is now scanning.
12% Channel Found
EXIT