Skoda Octavia Owner's Manual page 17

Help for voice control

Read and observe on page 14 first.
Start introduction
When you give the voice command Start tutorial, the unit plays one of the sev-
en parts of the voice control tutorial.
Individual parts of the introduction can be called separately by the saying the
voice command Introduction part ... and the number 1 through 7.
Help
When you give the voice command Help, the unit displays a menu containing
possible context depedent voice commands. In some cases after repeating the
voice command help another part of the help is reproduced with a menu of
possible voice commands.
The help does not contain all possible commands.
Operation

Read and observe on page 14 first.
The voice control system can usually be operated through the method "say
what you see."
Say the descriptions of the green highlighted function keys. For example, the
function key select no. can be accessed via the voice command "select num-
ber".
Voice control settings » page 20.
Icons in the voice control menu
a voice output is played

a voice command is awaited

a voice command entry is stopped

a voice command is recognized

It is not necessary to wait for the end of message playback when the system is
playing a voice output. The message can be ended by briefly pressing the
button or the symbol key  on the multifunction steering wheel. This cancels
voice output and causes the system to wait for a new voice command.
» page 15
not recognizing a voice command

Read and observe
If a voice command is not recognised, the system answers with Pardon? and
you can give a new command.
If the system does not recognise the second voice command, the help mes-
sage is provided again and you can give a new command.
If the system does not recognise the third voice command, the system plays
the Voice control cancelled message and the dialogue is ended.
Correction possibility of a voice command input

Read and observe
A voice command can be corrected, modified or re-entered by briefly pressing
the button on the device or the symbol key  on the multifunction steer-

ing wheel. However, this is only possible if the symbol 
You do not have to wait until the voice command is recognized by the system.
Stop/restore voice command input

Read and observe
In some menus, the procedure for entering voice commands can be stopped by
turning the knob » Fig. 1
2
The symbol displayed on the unit screen or in the information display then
changes from to  on .
Restore entry
›
by pressing the function key ;
›
by pressing the button on the device;

›
Press the symbol key  on the multifunction steering wheel.

on page 14 first.
on page 14 first.
on page 14 first.
on page 5.
Unit operation
15