Page 1
L A R G E F O R M AT P R I N T E R & E N L A R G E R LAN SETUP INSTRUCTIONS 800.788.5572 GraphicProducts.com...
Page 2
FOR WINDOWS-BASED SYSTEMS Echo LAN Setup Process Preparing to use your Echo over a LAN (network) is a two-part process. First, you will create the necessary settings on your Echo. Then, you will install the Echo driver software on your computer, using matching settings there.
Page 3
FOR WINDOWS-BASED SYSTEMS Installing the Driver Software Once your Echo has the correct network settings, it is time to create matching settings on your computer. Driver installation may also require the help of your IT team. Start the “Installation Wizard” program from your Echo software CD. When prompted to choose a printer model, select the Graphic Products Echo, and choose a file location for the necessary files.
Page 4
When prompted for a Printer Name or Address, enter the Address value that you wrote down earlier. (When entering this number, omit leading zeroes; for example, if the full address on your Echo was “192.168.000.012”, you would enter “192.168.0.12”, as pictured.) Then, click Next.
Page 5
When the process is finished, you will see a message that the installation completed successfully. You will now be able to print posters over the network as long as Echo is in its LAN Connected mode. If you have any questions, please contact Graphic Products for support at 800.788.5572 (international: 1.503.644.5572) and we’ll be happy to...
Page 6
LAN mode once more. Echo will wait for a print job. Installing the Driver Software Once your Echo has the correct network settings, it is time to create matching settings on your computer. Driver installation may also require the help of your IT team.
Page 7
Click Add to finish adding the printer entry for your Echo. You will now be able to print posters over the network as long as Echo is in its LAN Connected mode. If you have any questions, please contact Graphic Products for support at 800.788.5572 (international: 1.503.644.5572) and we’ll be happy to...
Need help?
Do you have a question about the echo and is the answer not in the manual?
Questions and answers