Panasonic PT-VW350 Operating Instructions Manual page 88

[Network config] page
Click [Detailed set up] → [Network config].
1) Click [Network config].
f The [CAUTION!] screen is displayed.
2) Select the item which you want to change the setting, then click [Next].
f The current setting is displayed.
3) Click [Change] button.
f The setting change screen is displayed.
1 [DHCP ON]/[DHCP OFF]
To enable the DHCP client function, set to [DHCP ON].
2 [IP ADDRESS]
Enter the IP address when not using a DHCP server.
3 [SUBNET MASK]
Enter the subnet mask when not using a DHCP server.
4 [DEFAULT GATEWAY]
Enter the default gateway address when not using a
DHCP server.
Note
f When you use the "Forward" and "Back" functions of your browser, a warning message "Page has Expired" may appear. In
that case, click [Network config] again since the following operation will not be guaranteed.
f Changing LAN settings while connected to the LAN may cause the connection to cut out.
88 - ENGLISH
Chapter 4 Settings - [NETWORK] menu
5 [DNS1]/[DNS2]
6 [Back]/[Next]
Enter the DNS1/DNS2 server address.
Permissible/ available characters for the entry of DNS1/
DNS2 server address.
(primary):
Numbers (0 - 9), period (.)
(Example: 192.168.0.253).
Click the [Back] button to return to the original screen.
The current settings are displayed by pressing the [Next]
button.
Click the [Submit] button to update the settings.