Resetting Adjustment Values To The Factory Default; Main Menu - Panasonic PT-VW350 Operating Instructions Manual

Note
f Pressing the <MENU> button or <RETURN> button while the menu screen is displayed returns to the previous menu.
f Some items may not be adjusted or used for certain signal formats to be input to the projector. The menu items that cannot
be adjusted or used are shown in gray characters, and they cannot be selected. [DIGITAL CINEMA REALITY] and [FRAME
LOCK] may not be displayed depending on the input signal.
f Some items can be adjusted even if signals are not input.
f Individual adjustment screen is cleared automatically if no operation is performed for approximately five seconds.
f For menu items, refer to "Main menu"

Resetting adjustment values to the factory default

If the <DEFAULT> button on the remote control is pressed, the values adjusted in the menu items are restored to the factory
default settings.
button
1) Press the <DEFAULT> button on the remote control.
Note
f You cannot reset all the settings to the factory default at a time.
f To reset all the settings adjusted in the sub-menu item to the factory default one at a time, execute
SETUP] menu → [INITIALIZE ALL]
f Some items cannot be reset by pressing the <DEFAULT> button. Adjust each item manually.

Main menu

The main menu consists of the following 7 menu items.
When a main menu item is selected, the screen
Main-menu item
[PICTURE]
[POSITION]
[LANGUAGE]
[DISPLAY OPTION]
[PROJECTOR SETUP]
[SECURITY]
[NETWORK]
48 - ENGLISH
Chapter 4 Settings - Menu Navigation
(x page 48) and "Sub-menu"
(x page 75).
changes to a sub-menu
(x page 49).
selection screen.
Page
51
56
61
62
69
76
79
the [PROJECTOR