Table of Contents
Advertisement
5.
Right-click the R8000 image and select Dynamic QoS.
The Dynamic QoS screen displays.
6.
Make sure that Dynamic QoS is enabled and click the Close button.
If Dynamic QoS is not enabled, see
page 43.
7.
On the network map, right-click the router image again and select Statistics.
The Bandwidth Utilization screen displays.
8.
From the menus at the top of the screen, select the following:
•
Download or Upload
•
Per Device or Per App
•
Real time
9.
Click the Refresh button.
Your changes take effect.
Edit Device Bandwidth Priority
You can edit the bandwidth priority given to each device that is connected to the router's
network.
To edit a device's bandwidth priority:
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
2.
Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3.
Enter the router user name and password.
Nighthawk X6 AC3200 Tri-Band WiFi Router
Enable Dynamic QoS Using the genie App
Optimize Performance
47
on
Advertisement
Table of Contents
