Mute; Adjust The Volume; Use Smart Sensors - Plantronics Voyager Edge UC Series User Manual

Caller Announcement (mobile phone only)
When wearing your headset, you will hear the name of a contact calling you so you can decide
whether to answer or ignore the call without having to check the phone screen.
An incoming caller name is announced:
• if your phone supports Phone Book Access Profile (PBAP)
• if you granted access to your contacts during pairing process (for many mobile phones, this is
preset out-of-the box and may not be necessary)
• if the caller is stored in the phone's contacts list
An incoming caller name is not announced: if the caller is unknown, unlisted, or blocked

Mute

During a conversation, press the Mute button . You hear "mute on" or "mute off." An alert
repeats every 15 minutes when mute is on.
NOTE
taken off and the headset is no longer muted.

Adjust the volume

Toggle the Volume button
While not on a call or streaming audio you can toggle the Volume button
volume level for Caller Announce and other voice prompts.

Use Smart Sensors

Smart sensors in this headset recognize if the headset is being worn and can automatically
perform time-saving functions.
Putting on your headset will:
• Answer an incoming call
• Transfer an active call from your phone
• Resume streaming audio
Taking off your headset will:
• Transfer an active call to your phone
• Pause streaming audio
• Lock the Call button to avoid accidental calls
Reset sensors
You may need to reset the sensors if they are not working as expected.
To reset your sensors, connect the headset directly to your computer's USB port, and place it,
with the eartip up, on a flat non-metallic surface for more than 10 seconds.
If the headset smart sensors are enabled (default), mute is deactivated when the headset is
up (+) or down (–) during a call or while streaming audio.
to adjust the
13