We also recommend that you install the Plantronics software located at plantronics.com/ software. With it installed you can: • Customize your headset and USB adapter settings to your personal preferences •...
Page 2
Charge case overview IMPORTANT The charge case is placed in deep sleep mode after manufacturing to save power and protect the battery. To wake-up the charge case, plug it into a power source for a minimum of 1 minute. The LED's flash when charging. Charge case LEDs;...
Page 3
Pair NOTE If your phone supports Near Field Communication (NFC), go to NFC pairing. Bluetooth pairing Wearing your headset, power it on. You hear “welcome” in all the supported languages and then "pairing" in the default language. The headset LED flashes red and blue. ®...
Page 4
Select language Once your headset is paired and connected to your phone, you can change the headset language. Wearing your headset, power it on. Press and hold the Volume up + and down – buttons together until you hear “welcome." The language selection directions repeat in every supported language.