Advertisement
Dirty Dragon Guitar Amplifier Owner's Manual
5 – PLAY/STANDBY/OFF – An all-inclusive function control - go from OFF to STANDBY
to PLAY, with one switch.
When powering the amplifier on, the unit should be
switched to the STANDBY position for at least five (5) minutes before switching to
the PLAY position. Additionally, when shutting down the amplifier, place this switch
in the STANDBY position for at least five (5) minutes before switching to the OFF
position. After placing the unit in the OFF position, allow the unit to cool down
before transporting, as the tubes are still hot and more likely to be damaged due to
shock or vibration. Taking these precautions can help to greatly extend the life of
the tubes, especially the output tubes.
PAGE 5
Advertisement
