Configuring Nbn Connection Settings - Cisco 867VAE-W Quick Start Manual

4. Select Connection. Enable PPoE
should be ticked. Next to Description
please enter "iiNet" and then change
VPI to "8" and VCI to "35".
5. Select Authentication and tick PAP.
Enter the details below and click
OK to finish. You'll find WiFi setup
advice on page 11.
Username: Your full ADSL/Naked
username (include any
"@domain.com.au")
Password: Your ADSL/Naked
password (case sensitive)
16

Configuring NBN Connection Settings

Using a computer that's connected to your Cisco 867VAE-W router, open your web browser and go to
http://10.10.10.1
You will be prompted for a user name and password, by default these are:
Username: iinet
Password: iinet
1. For NBN connections, under
Interface and Connections
select GigabitEthernet2.
17