Chamberlain LiftMaster Q Installation Manual page 22

Displays customer messages in one of seven
Current Language:
ENGLISH languages. Setup functions are in English only.
Press * to Change
The other languages are French, Spanish,
PRESS # WHEN DONE
Danish, Norwegian, Deutsch (German), Dutch,
Portuguese, and Italian. The default is English.
Controls how the date is displayed on the
Date Format: US
Press * to Change screen. Options are US and EUROPEAN. US
PRESS # WHEN DONE
format displays MM/DD/YY. European format
displays DD/MM/YY. The factory default is US.
Controls how the time is displayed. Options
Time Format: 12 hr
Press * to Change are 12 Hour and 24 Hour. The 12 Hour
displays the time as HH:MM:SS followed by
am or pm. The hour will be displayed as
PRESS # WHEN DONE
12:00:00 am to 12:00:00 pm. The 24 Hour
format displays the time as HH:MM:SS
without the am or pm indicator. The hour will
be displayed as 00:00:00 to 23:59:59. The
factory default of 12 Hour.
Controls the function of Relay 2. Options are
Relay #2 Function:
AUX. OUTPUT ALARM OUTPUT, HOLD OPEN BY TIME,
Press * to Change
SLAVE TO RELAY 1, DIFFERENT HOLD
TIME, and AUX. OUTPUT. The factory default
PRESS # WHEN DONE
is Aux. Output.
When Relay #2 is set for: Causes Relay 2 to operate at the same time
as Relay 1. This allows it to be used for a
SLAVE TO RELAY #1
secondary device without having to put in a
separate isolation relay.
When Relay #2 is set for: Relay 2 operates at the same time as Relay 1
but is activated for a different length of time.
DIFFERENT HOLD TIME
This is useful when dual gate operators or
door holders are used that require different
activation times. When this option is selected,
the following prompt will appear.
Sets the hold time for Relay 2 when it is used
Relay #2 Hold Time
In seconds: 001 with a DIFFERENT HOLD TIME from Relay 1.
PRESS # WHEN DONE
The maximum time is 255 seconds.
When Relay #2 is set for: Causes Relay 2 to operate as a separate
relay that can be used for door or gate
AUX. OUTPUT
access, lighting zones, elevators, etc. Its
function is independent of Relay 1 and is
controlled by the Q2010. This allows the
keypad to be used as a 2-channel relay board
as well as an access device.
18
When Relay #2 is set for: Activates Relay 2 when a system alarm occurs,
allowing the relay to be used to control an
ALARM OUTPUT
external alarm horn or other alarm device.
When Relay #2 is set for: Allows Relay 2 to be used for a secondary
slide gate or overlock device to be held open
HOLD OPEN BY TIME
for a fixed time. Set the open and close times
for each weekday and for holidays. The next
holiday date is also programmed.
Sets the time of day on Monday that Relay 2
Enter MONDAY
OPEN Time will activate.
PRESS # WHEN DONE
Sets the time of day on Monday that Relay 2
Enter MONDAY
CLOSE Time will deactivate.
PRESS # WHEN DONE
Sets the time of day on Tuesday that Relay 2
Enter TUESDAY
will activate.
OPEN Time
PRESS # WHEN DONE
Sets the time of day on Tuesday that Relay 2
Enter TUESDAY
will deactivate.
CLOSE Time
PRESS # WHEN DONE
Sets the time of day on Wednesday that
Enter WEDNESDAY
Relay 2 will activate.
OPEN Time
PRESS # WHEN DONE
Sets the time of day on Wednesday that
Enter WEDNESDAY
Relay 2 will deactivate.
CLOSE Time
PRESS # WHEN DONE
Sets the time of day on Thursday that Relay 2
Enter THURSDAY
will activate.
OPEN Time
PRESS # WHEN DONE
Sets the time of day on Thursday that Relay 2
Enter THURSDAY
will deactivate.
CLOSE Time
PRESS # WHEN DONE
Sets the time of day on Friday that Relay 2
Enter FRIDAY
will activate.
OPEN Time
PRESS # WHEN DONE
Sets the time of day on Friday that Relay 2
Enter FRIDAY
will deactivate.
CLOSE Time
PRESS # WHEN DONE
Sets the time of day on Saturday that Relay 2
Enter SATURDAY
OPEN Time will activate.
PRESS # WHEN DONE
Sets the time of day on Saturday that Relay 2
Enter SATURDAY
CLOSE Time will deactivate.
PRESS # WHEN DONE
19