Removing The Power-Switch Board; Installing The Power-Switch Board - Dell OptiPlex 9020 Owner's Manual
Ultra small form factor
Hide thumbs
Also See for OptiPlex 9020:
- Owner's manual (61 pages) ,
- Technical manualbook (59 pages) ,
- Setup & features manual (9 pages)
Table of Contents
Advertisement
Removing the Power-Switch Board
1.
Follow the procedures in
2.
Remove:
a. cover
b. front bezel
c. drive cage
3.
Disconnect the power-switch cable from the power-switch board.
4.
Remove the screw and pull the power-switch board out of the computer.
Installing the Power-Switch Board
1.
Align the power-switch board to the front of the computer and tighten the screw.
2.
Connect the power-switch cable to the power-switch board.
3.
Install:
a. drive cage
b. front bezel
c. cover
18
Before Working Inside Your Computer .
Advertisement
Table of Contents
