Sony BDV-N9200W Operating Instructions Manual page 44

Listening to the Radio
Press FUNCTION repeatedly until
"FM" appears in the top panel
display.
2
Select the radio station.
3
Automatic tuning
Hold down TUNING +/- until the
auto scanning starts.
[Auto Tuning] appears on the TV
screen. Scanning stops when the
system tunes in a station.
To cancel automatic tuning, press
any buttons.
Manual tuning
Press TUNING +/- repeatedly.
Press VOL +/- repeatedly to adjust
the volume.
If an FM program is noisy
If an FM program is noisy, you can select
monaural reception. There will be no
stereo effect, but reception will
improve.
Press OPTIONS.
The option menu appears on the TV
screen.
2
Press tl,/4 to select [FM Mode],
then press _.
3
Press */4 to select [Monaural],
then press _,
• [Stereo]: Stereo reception.
• [Monaural]: Monaural reception.
m
You can set [FM Mode] for each preset
station separately.
You can preset up to 20 stations. Before
tuning, make sure to turn down the
volume to minimum.
2
3
4
5
6
Press FUNCTION repeatedly until
"FM" appears in the top panel
display.
Hold down TUNING +/- until the
auto scanning starts.
Scanning stops when the system
tunes in a station.
Press OPTIONS.
The option menu appears on the TV
screen.
Press _/4 to select [Preset
Memory], then press _.
Press _/4 to select the preset
number you want, then press _,
Repeat Steps 2 to 5 to store other
stations.
To change a preset number
Select the preset number you want by
pressing PRESET +/-, then perform the
procedure from Step 3.
To select a preset station
1
Press FUNCTION repeatedlyuntil "FM"
appears in the top panel display.
The last received station is tuned in.
2 Press PRESET +/- repeatedly to select
the preset station.
m
Each time you press DISPLAY, the display in
the top panel display changes cyclically as
follows:
Frequency--_ Preset number--_ Decoding
status*
* Appears when [Sound Effect] is set to
[Dolby Pro Logic], [DTS Neo:6 Cinema], or
[DTS Neo:6 Music] (page 57).
44us