The Main Unit; Changing The Brightness; Enjoyingthe Visualizationon The Tv Screen; Saving Power In Standby Mode - Sony BDV-N9200W Operating Instructions Manual

To check the remaining time
Press SLEEPonce.
To change the remaining time
Press SLEEPrepeatedly.
Enjoyingthe
Visualizationon the TV
Screen
Deactivating the Buttons
on the Main Unit
(Child Lock)
You can deactivate the buttons on the
main unit (except for I/(_) for preventing
misoperation, such as child mischief.
Touch and hold • on the main unit for
more than 5 seconds.
"LOCKED" appears in the top panel
display.
The child lock function is activated and
the buttons on the main unit are locked.
(You can operate the system by using
the remote control.)
To cancel, touch and hold • for more
than 5 seconds until "UNLOCK" appears
in the top panel display.
_t'6qF4
Changing the Brightness
You can change the brightness of the
following items:
- Top panel display
-Indicator of the soft-touch buttons
- LED indicator on the top panel
Press DIMMER,
Each time you press the button, the
brightness of the item is changed.
You can adjust the brightness in
3 levels.*
* Fortop panel display, the brightness for
[Dimmer: 1], [Dimmer: 2] and
[Dimmer : 3] settings are the same.
You can enjoy the visualizer effect
which simulates the beat of the played
back sources to the colorful designs and
graphics. You can stream the effects
during music playback (only for
"BD/DVD", "USB", "FM", "TV", "BT" and
"AUDIO" functions) and built-in sound
demonstration.
Press VISUALIZER repeatedly.
The visualization appears on the TV
screen and synchronizes with the beat
of the music. Each time you press the
button, the color effect changes
cyclically as follows:
[RAINBOW]-_ [PASSION]-_ [OCEAN]-_
[FOREST] -_ [Off]
The visualizer effect may become
unsmooth when you play back High Bitrate
Audio content more than 15 Mbps.
m
• To avoid the information appears on the
TV screen and overlaps with the
visualization, set [Auto Display] in
[System Settings] to [Off] (page 60).
• You can also select the visualizer effect by
using the option menu.
Saving Power in Standby
Mode
Check that you have made the following
settings:
- [Control for HDMI] in [HDMI Settings] is
set to [Off] (page 59).
- [Quick Start Mode] is set to [Off]
(page 60).
- [Remote Start] is set to [Off] (page 61).
- [NFC] is set to [Off] (page 59).
o
0
"o
49us