Rack Mounting - Ahuja AMX-912 Operation Manual

The Mixer has been designed for free standing as well as for standard 19" Rack Mounting. The procedure to be
followed for rack mounting is given below.
1. Remove the Top Panel by unscrewing the mounting screws
(8 Nos.) and place the Top Panel on the right side of the
cabinet. The Top Panel can be placed on a Soft Surface (a
cushion or foam piece) to avoid damage to the controls on
the Top Panel.
2. Remove the Power Supply Plate by unscrewing the mounting
screws (2 Nos.) on the Rear Panel. Pull in the Power Supply
Plate with the AC Mains cord.
3. Tilt the Bottom Panel (Cabinet) towards the right side and
remove the Blank Plate from the Bottom Panel by unscrewing
the mounting screws (2 Nos.).
4. Pull out the AC Mains cord attached to the Power Supply Plate
through the opening on the Bottom Panel. Now fix the Power
Supply Plate on the Bottom Panel using the mounting screws
(2 Nos.).
5. Fix the Blank Plate on the Rear Panel of the Mixer using the
mounting screws (2 Nos.).
6. Next fix the Top Panel back on to the cabinet using the mounting
screws( 8 Nos.).
7. Mount the Mixer on to a rack through the slotted holes on the side flanges.
11

Rack Mounting

l
AMX-912