Samsung NP-P580 User Manual page 149

 Entering Pairing mode
For more information about entering Pairing mode,
refer to the user manual of the headset. In this section,
we will describe the general method to enter Pairing
mode.
- Power button type headsets (headsets that are
turned on by pressing the power button)
If you press and hold the power button for 1~3
seconds, the power is turned on. If you do not release
the button even after the power is turned on, the
headset enters Pairing mode.
- On/Off switch type headsets (headsets that are
turned on or off by sliding the power switch to the
corresponding position.)
Turn the headset on by sliding the power switch to the
on position while holding down the Call button.
The headset is turned on in Pairing mode. Check if the
headset is in Pairing mode through the headset LED.
After switching to Pairing mode, search for the headset
in the Bluetooth device window on the computer.
In general, Pairing mode automatically turns to On/Off
mode after a predetermined period of time. In this
case, you have to turn the headset off and then on and
make the headset enter Pairing mode again to connect
to the computer.
Usage Instructions
 Generally, Bluetooth devices deliever stable
performance while connected within a 3m(10 ft.)
distance.
 For Bluetooth to operate smoothly, use the computer in
an open environment with no walls or obstacles in the
way and having low radio interference.
 You can connect to only one Bluetooth device at a
time for a phone connection, data syncing, electronic
business card exchange, FAX transmission/reception,
sound related functions, and serial port functions.
 It is recommended using only one Bluetooth device at a
time as connecting multiple Bluetooth or other wireless
devices at the same time may slow or destabilize the
Bluetooth connection.
 Data communications via Bluetooth may be poor when
the CPU load is at full capacity or there are insufficient
system resources.
 The Bluetooth function of a Bluetooth PDA, mobile
phone, mouse or keyboard may be turned off. To
use them in connection with a Samsung computer
supporting Bluetooth, you must check if the Bluetooth
function of the device to connect to is turned on.
For the procedures on turning on the Bluetooth function
of a device, refer to the relevant device manual.
 The services provided by Bluetooth devices may
vary depending on their capabilities. For the services
provided by the Bluetooth device, refer to the device
manual.
149