Operating Faults - CITROEN DS3 Handbook

Programming
You can activate or deactivate the system by
means of the multifunction screen configuration
menu. The system state is memorised when
switching off the ignition.
For more information on access to the parking
sensors menu, refer to "Vehicle configuration"
or "Vehicle parameters" section for your
multifunction screen.
The system will be deactivated
automatically when towing a trailer or
when a bicycle carrier is fitted (vehicle
fitted with a towbar or bicycle carrier
recommended by CITROËN).

Operating faults

If there is an operating fault, when
reverse gear is engaged this
warning lamp comes on in the instrument panel,
accompanied by an audible signal (short beep)
and a message in the multifunction screen.
In bad or wintry weather, ensure that
the sensors are not covered with mud,
frost or snow.
129
Driving