[] Connecting A Dvd Player/Set-Top Box Via Dvi; Connecting A Digital Audio System - Samsung HL-T5055W Owner's Instructions Manual

Connecting a DVD Player/Set-Top Box via DVl
This connection can only be made if there is a DVl Output jack on the external device,
1 Connect a HDMI/DVI Cable or
DVI-HDMI Adapter between the
HDMI I/DVl IN jack on the TV and
the DVl jack on the DVD Player/
Set-Top Box.
2 Connect Audio Cables between the
DVl IN [L-AUDIO-R] jack on the TV
and the AUDIO OUT jacks on the
DVD Player/Set-Top Box.
DVD Player/Set-Top Box
TV Rear Panel
_-- Each DVD Player/Set-Top box has a different panel configuration.
_- When connecting a DVD Player/Set-Top box, match the color of the connection terminal to the cable.
_- When using an HDMI/DVl cable connection, you must connect to the HDMI I/DVl IN terminal on the TV.
Connecting a Digital Audio System
The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV.
Each Digital Audio System has a different panel configuration.
1 Connect an Optical Cable between
the DIGITALAUDIO OUT (OPTICAL)
jack on the TV and the Digital Audio
Input jack on the Digital Audio
System.
When a Digital Audio System is
connected to the DIGITAL AUDIO
OUT (OPTICAL) terminal: Decrease
the gain (volume) of the TV, and
adjust the volume level with the
system's volume control.
_- 5.1CH audio is possible when the TV
is connected to an external device
supporting 5.1CH.
Digital Audio System
TV Rear Panel
What is OPTICAL?
• Converts the electric signal into an optical light signal, and transmits it through glass fibers. S/PDIF is a transmission system of digital
audio in the form of a light wave that uses a glass conductor.