Getting Started; Battery Installation - VTech Smart Stunts RC Cruiser User Manual

GETTING STARTED

BATTERIES
The Smart Stunts RC Cruiser™ operates on 4 AA batteries (AM-3/LR6).
Batteries are included for demo purposes only. For best performance,
remove all factory-installed batteries and use new, alkaline batteries.
The REMOTE CONTROLLER operates on 2 AA batteries. Batteries
are not included.

BATTERY INSTALLATION

Smart Stunts RC Cruiser™
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom of the
unit and open it with a screwdriver.
3. Install 4 new "AA" size (AM-3/LR6) batteries
following the diagram inside the battery
box. (The use of new alkaline batteries is
recommended for maximum performance.)
4. Replace the battery cover and tighten the
screws to secure.
Remote Controller
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back of the
unit and open it with a screwdriver.
3. Install 2 new "AA" size (AM-3/LR6) batteries
following the diagram inside the battery
box. (The use of new alkaline batteries is
recommended for maximum performance.)
4. Replace the battery cover and tighten the
screw to secure.
4