Casablanca M8506-01 Owner's Manual page 15

Light Kit (continued)
Using the ceramic wire connectors, connect
the blue wire from the fan to the blue wire
from the light kit. Connect the white wire from
the fan to the white wire from the light kit.
Note: Be sure to use the CERAMIC wire
connectors to avoid fire hazard.
Tuck the wires into the light kit, then lift the
light fixture and align the screw holes in
the light fixture with the screw holes in the
light kit. Install the three light fixture screws,
found in the hardware bag.
15
M8506-01 • 10/30/14 • © Casablanca Fan Company
www.CasablancaFanCo.com
Install a halogen bulb in each socket.
When necessary, replace with bulbs of
the same type and wattage.
Make sure the light fixture is securely attached to the light kit.
Failure to properly secure all 3 assembly screws could result
in the light fixture falling.
1.888.227.2178