Advertisement
Chopping blade
H
USE
If your unit comes with this accessory, read the following instructions. For a list of what is included with this model, refer to inside flap of the box.
CAUTION: CHOPPING BLADE IS
NOT LOCKED IN PLACE. IF USING
THE POUR SPOUT, ENSURE THE
LID IS FULLY LOCKED ONTO THE
BLEND AND PREP BOWL.
USING THE
USING THE CHOPPING BLADE:
CHOPPING BLADE
CAUTION: USE CAUTION WHEN
HANDLING THE CHOPPING BLADE AS THE
& DOUGH BLADE
BLADES ARE VERY SHARP.
1
Holding the Chopping Blade assembly by the top
of the shaft (H), place it onto the gear shaft inside
the bowl. Ensure that the attachment fits around
the gear shaft and that it is standing straight.
2
Add the ingredients and secure the bowl lid
onto the bowl.
3
Plug the power cord into the electrical outlet.
Once the bowl is engaged, the programs
available for that attachment will illuminate.
Select the program desired based on your recipe.
The Auto-iQ
automatically at the end of the program.
8
I
CAUTION: THE CHOPPING BLADE
IS NOT LOCKED IN PLACE.
IF POURING WITH THE LID
REMOVED, ALWAYS REMOVE
THE CHOPPING BLADE FIRST.
4
REMOVAL:
5
6
7
8
program will stop the appliance
®
®
J
K
REMOVAL
When you have reached your desired
consistency, stop the appliance by pressing the
START/STOP button or selecting the program
twice. Wait for the blade to stop turning.
To remove the lid, press the release button (I) on
the lid and pull the lid handle up to a 90° angle.
Turn the bowl anticlockwise and lift it to remove
it from the motor base (J).
Make sure that the motor base is unplugged
when not in use.
To release the motor base from the counter or
tabletop, place your fingers under the sides of
the black paddles on the sides of the base and
lift up to release suction cup feet (K).
w w w . n i n j a k i t c h e n . e u
Dough blade
L
USE
IMPORTANT: DO NOT
OVERFILL. TO AVOID SPILLING,
DO NOT ADD INGREDIENTS
PAST THE "MAX" FILL LINE.
USING THE DOUGH BLADE:
IMPORTANT:
This makes 500g of dough at a time.
Do not overfill or exceed. Motor may overheat.
1
Holding the Dough Blade assembly by the top of
the shaft (L), place it onto the gear shaft inside
the bowl. Ensure that the attachment fits around
the gear shaft and that it is standing straight.
2
Add the ingredients and secure the bowl lid onto
the bowl.
3
Plug the power cord into the electrical outlet.
Press the START/STOP button to turn on the
unit. Once the bowl is engaged, the programs
available for that attachment will illuminate.
Select LOW on the control panel and process
until ingredients come together to form a mass.
4
Once finished making the dough, stop the appliance
by pressing the START/STOP button again or
selecting the program twice. Wait for the blade to
stop turning.
Advertisement
