Philips Selecon Operation Manual page 2

PAN TILT ADJUSTMENT
ACCESSORIES

Barndoor ARLBD****

Snoot ARLSN****

Beamshaper ACNTMHBS** (Beamshaper without a lamp)

Various coloured glass and effects available
Mounting options include track adaptors, ceiling mount plate, suspension hook clamp. For full details contact your Philips
Selecon dealer: www.seleconlight.com/distributors
SAFETY AND MAINTENANCE
Keep your Accent Spot in top condition and performing at its best by cleaning it regularly with a soft cloth.
The above is the only maintenance task that can be safely carried out by non approved personnel.
Philips Selecon has manufactured this luminaire in accordance with recognised best practices to recommended international
safety standards. It is your responsibility to maintain this luminaire in good and safe working condition.
Repairs should only be carried out by suitably qualified persons. Do not operate the luminaire with damaged lamps or
cables, etc. Consult your Philips Selecon distributor for assistance. Only replace damaged parts with authorised Accent
spare parts.
N.B. Luminaire electrical cable – your Accent Spot is fitted with special heat resistant flexible cable, replace with genuine
Accent spare part cable kit only – please refer to your Selecon distributor.
(Replacement cable kits are supplied complete with necessary terminal connectors).
ELECTRICAL INSTALLATION
WARNING!!!
Risk of fire and electric shock. This product is to be installed by a qualified electrician only. This luminaire employs a
grounded type receptacle and is not intended for connection to a two-wire, ungrounded source of supply.
When installing this luminaire use wire conductor colour codes as follows:
LIMITED WARRANTY
Philips Selecon ("Selecon") warrants all Philips Selecon luminaires against defects in materials or workmanship. The term of
this warranty is three years; from the date of delivery, and is dependent on the following operating conditions:
FOR ARCHITECTURAL DISPLAY: the Accent Spot is used as a display light and in conditions typically found in a museum
being 10 to 12 hours daily, 7 days per week.
For full details of the Philips Selecon Warranty, please refer to our website:
Australian customers - please refer to the Australia specific warranty card included with this product.
Adjusting the pan angle
Release the set screw
above the ballast box (as
shown) and adjust
accordingly. Re-lock after
adjustment.
Brown
Blue
Green/Yellow
Philips Selecon, 19-21 Kawana Street, Northcote, Auckland 0627, New Zealand
Ph: +64 9 481 0100, Fax: +64 9 481 0101
www.seleconlight.com
JUNE 2012 © 2012 Philips Selecon All Rights Reserved
**** 01 for White, 03 for Black, 0103 for Black/White
** 01 for White, 03 for Black
- Phase, Live
- Neutral, Return
- Earth
Manufacturer
Adjusting the tilt angle
The tilt can be adjusted
by unlocking the hex
screw located as shown.
Re-lock after adjustment.
www.seleconlight.com