Lifestyle Functions; Overview Parameters - Rehau NEA Operating Instructions Manual

4.7

Lifestyle functions

Lifestyle function Symbol
Party
Deactivates the
temperature setback for
XX hours
Presence
Weekend heating times
are also used for working
days
Day
(default setting)
Permanent regulation
according to the set
target temperature
Night
Permanent setback
according to pro-
grammed night
temperature.
Automatic
Automatic temperature
regulation according to
the correspondingly
activated comfort
programs
Deactivates the room
control unit, the
temperature is still
displayed, frost
protection is activated
Selection of heating or
cooling mode
The operating mode can
be set on the room
control unit D when the
CO pilot function is
activated on the base.
Holiday mode
The temperature is
automatically lowered to
the set holiday
temperature
Child safety lock
Locks the room
operating unit
BACK
The room control unit
returns to the basic level.
Tab. 4-3 Lifestyle functions
Steps
- Activate by pressing.
- Set the duration in hours (hh)
- Confirm your entry by
pressing.
- The automatic mode is only
available on workdays.
- Activate by pressing.
- Finish by selecting another
Lifestyle function.
- Activate by pressing.
- Activate by pressing.
- Activate by pressing.
- Press in order to switch off the
room control unit
- Press again to switch the room
control unit on again
(The CO pilot of the base is
activated.)
- Activate by pressing.
- Select the mode.
- Confirm your entry by
pressing.
- Activate by pressing.
- Select 1. the start date and
2. the end date (dd:mm)
confirm by pressing.
- Deactivate the holiday mode by
calling the function again.
- Activate by pressing.
- Deactivate by pressing (>3 s).
- Exit the menu by pressing
4.8

Overview parameters

This menu is needed only for basic setup.
- Press the control knob.
- Select the menu "Parameters" and activate it by pressing again.
The following parameters are available to you; you can find further
information in the table "Parameters" on the next page.
It may take up to 10 minutes before changes of global system
parameters are displayed on all room control units.
RES
USER
XX.X
–
XX.X
XX.X
SET
TIME
P0
P0
6-7
1-5
Fig. 4-3 Selection of parameters
+
min.
max.
E-CL
SET
9