Versions; Technical Data; Compliance - Rehau NEA Operating Instructions Manual

2 VERSIONS

2.1

Technical data

Floor temperature
monitoring
Power supply
BUS connection [rmBUS]
Protection type/protection
class
Ambient temperature
Ambient humidity
Dimensions (HxWxD)
Target temp. setting range
Target temp. resolution
Actual temp. measuring
range
Measuring accuracy of
internal NTC
Tab. 2-1 Technical data Nea Smart room control unit D
4
Nea Smart room control unit D
Nea Smart remote sensor (optional)
24 ... 35 V [via rmBUS]
polarity reversal protected
IP20 / III
0 to 50 °C
5 to 80%, not condensing
86 x 86 x 26,5 mm
5 bis 30°C
0.2 K
0 bis 40°C (int. sensor)
±0.3 K
2.2

Compliance

This product is labelled with the CE Marking and thus is in compliance
with the requirements from the guidelines:
- 2004/108/EG with amendments "Council Directive on the approxi-
mation of the laws of the Member States relating to Electromagnetic
Compatibility"
- 2006/95/EG with amendments "Council for Coordination of the
Regulations of EU Member Countries regarding the electrical
equipment for use within certain voltage limits"
Increased protection requirements may exist for the overall installation,
the compliance of which is the responsibility of the installer.