•Foam materials, like polystyrene, can be easily bonded to other surfaces. However the adhesive must be applied to the other surfaces, not to the foam. •Use only genuine Loctite® Hysol™ hot melt adhesive sticks to ensure reliable performance. Loctite® Hysol™ hot melt adhesive sticks are non-toxic and non-flammable.
Replace the rubber safety cover. Servicing and Repairs The Loctite® Hysol™ Hot Melt Applicator contains no user-serviceable parts other than the nozzle. In order to avoid a hazard, any servicing or repairs, including replacement of the supply cord, should only be carried out by the manufacturer, its service agent, or other similarly qualified person.
Warranty Loctite® Henkel Corporation expressly warrants that all products referred to in this Instruction Manual for the Hysol™ 050A-HT Hot melt Applicator (hereafter called “ Products” ) shall be free from defects in materials and workmanship. Liability for Henkel shall be limited, as its option, to replacing those Products which are shown to be defective in either materials or workmanship or to credit the purchaser the amount of the purchase price thereof (plus freight and insurance charges paid therefore by the user).