Subscribe to Our Youtube Channel
Related Manuals for Loctite Hysol 175-SPRAY
Summary of Contents for Loctite Hysol 175-SPRAY
- Page 1 EQUIPMENT Operation Manual Loctite® Hysol® 175-SPRAY 120 Volt Part No. 98037, 230 Volt Part No. 98057 Loctite® Hysol® 175-SPRAY-HT 120 Volt Part No. 98041, 230 Volt Part No. 98059...
-
Page 2: Table Of Contents
Contents Please Observe the Following..................2 Safety..........................2 Items supplied........................2 Description ........................3 Technical Data ........................ 3 Installation ........................4 Operation ......................... 4 Applying Adhesive - Spray Adjustment ................5 Adhesive Flow Rate Adjustment..................5 Application Hints ......................6 Troubleshooting ...................... -
Page 3: Please Observe The Following
1.2 Safety Do not touch the nozzle or molten adhesive with bare skin as they are hot - the ® ® operating temperature of the Loctite Hysol 175-SPRAY and 175-SPRAY-HT applicators is approximately 400ºF (200ºC). Protective gloves should always be worn. -
Page 4: Description
9 lbs. of molten hot melt per hour, yet only take 10 minutes to warm up. ® ® Supported by a range of spray adhesive formulations, the Loctite Hysol 175-SPRAY and 175-SPRAY-HT are suitable for most applications - they can even be used with heat sensitive substrates such as expanded polystyrene and other plastic foams. -
Page 5: Installation
4 Installation Before using the tool for the first time check it carefully for signs of external damage. If any transit damage is found DO NOT USE THE TOOL - return it to your supplier immediately. Steps 1 – 5 should be followed before connection to the main supply: Insert the applicator stand into the grooves at the base of the handle. -
Page 6: Applying Adhesive - Spray Adjustment
Should molten adhesive drip onto a smooth or polished surface, allow it to cool completely before removal. • Spray adhesives can be applied directly to expanded polystyrene and other plastic foams. ® ® • Use only genuine Loctite Hysol adhesives to ensure reliable performance. ® ® Loctite Hysol adhesives are non-toxic and non-flammable. -
Page 7: Troubleshooting
FOR ANY REPAIRS OR ADJUSTMENTS – OTHER THAN THOSE DETAILED IN THIS MANUAL – PLEASE CONTACT 1-800-LOCTITE (562-8483). 8 Care and Maintenance Every attempt has been made to make this exceptionally powerful tool both reliable and trouble-free. -
Page 8: Accessories And
9 Accessories and Spare Parts Spare Parts Part Number Complete Nozzle Assembly – Wide Angle 2mm 985122 (fitted as standard), item 9 Applicator Stand, item 12 985069 Piston Support Assembly, item 25 985093 Thermostat Assembly, 180°C, 367°F (for 175-SPRAY), item 10 985123 Thermostat Assembly, 195°C, 383°F (for 175-SPRAY-HT), item 48 985079... - Page 9 9 Accessories and Spare Parts (continued) Heater Housing Kit For 98041 & 98059 (Polyamides Adhesives) 985239 Qty 1 – O-ring Heater Housing, item 46 Qty 1 – Heater Housing, item 47 Qty 1 – Fitting, item 30 Qty 1 – Ground Screw, item 38 Qty 1 –...
-
Page 10: Appendix
10 Appendix Available nozzles / accessories. 985211 985122 985216 NARROW SPRAY STANDARD WIDE SPRAY ULTRA WIDE SPRAY NOZZLE ASSEMBLY NOZZLE ASSEMBLY NOZZLE ASSEMBLY 985087 985243 985397 HEAVY DUTY FREE- TOOL HANGER / AIRLINE FILTER STANDING METAL BALANCER REGULATOR STAND GAUGE Page 9... -
Page 11: Exploded Diagram
11 Exploded Diagram Page 10... -
Page 12: Parts List
12 Parts List ITEM QTY. DESCRIPTION REBUILD KITS AVAILABLE PART NO. THERMOSTAT, 130°C, 266°F, (OPTION) 985979 O-RING #2-017, FOR NOZZLE ASSEMBLIES O-RING #2-017 KIT OF 10 985834 O-RING #2-016, FOR NOZZLE ASSEMBLIES O-RING #2-016 KIT OF 10 985833 O-RING #2-011, FOR NOZZLE ASSEMBLIES O-RING #2-011 KIT OF 10 985832 THERMOSTAT, 195°C, 383°F, 175-SPRAY-HT... -
Page 13: Warranty
13 Warranty Henkel Loctite expressly warrants that all products referred to in this Instruction Manual for the Loctite® Hysol®175-Spray and Loctite® Hysol® 175-Spray-HT Hot Melt Applicators (hereafter called “Products”) shall be free from defects in materials and workmanship. Liability for Henkel... - Page 14 Auburn Hills, Michigan 48326 Loctite is a registered trademark of Henkel Loctite Corporation, U.S.A © Copyright 2003. Henkel Loctite Corporation. All rights reserved. Data in this operation manual is subject to change without notice. P/N: 985119 Rev. D, 09/03...
Need help?
Do you have a question about the Hysol 175-SPRAY and is the answer not in the manual?
Questions and answers