A008 / A6188+
Subscriber Identity Module (SIM) Cards and Security
Removing the SIM Card
1. Remove the Battery Door and Battery as described in the Disassembly Procedure
2. Holding unit with antenna upwards push black SIM carrier to the right and pull
upwards
Cut Corner
Inserting the SIM card
1. Locate the 1 cut corner of the SIM Card; slide the SIM fully into the carrier, gold
contacts facing down towards the unit.
2. Push the carrier down and slide to the right
Manual Test Mode
The Aoo8 is equipped with a manual test mode capability. This allows service personnel
to manually control electronic functions that would usually be initiated by the product's
operating software. This is achieved by the user entering specific test mode commands.
To enter there test commands a GSM / DCS Test SIM card (Part Number 8102430Z04)
must be used. See above for SIM Card entry procedure
Level 1 & 2 Service Manual
19