Magnavox MRV640 Owner's Manual page 59

5
To start recording, press REC/OTR n on the remote control
or RECORD n on the DVD recorder.
To start the recording after all other recordings on the disc,
press and hold the REC/OTR n button until '
in the display.
For DVD+Rs, each recording is always started after all previous
recordings since previous recordings cannot be overwritten.
The display panel will appear similar to the example shown at
right.
During recording, scenes can be marked so they can be found or hidden
later.
During recording, press EDIT at the start of the desired location.
'
the number of 'CHAPTERS' is increased by one.
For more information about title/chapter, please read the section
'Changing to a different chapter/track/title' in the chapter 'Other playback
functions'.
6 You can stop recording by pressing STOP h on the remote or
STOP h on the recorder. '
display. The DVD Recorder is preparing the list of contents. Wait
until this message disappears in the display, then the recording is
completed.
a
b The recording could not be completed correctly because of a disc
error. Check and clean the inserted disc if necessary.
If you want to playback recordings on a DVD player, you must first
finalize the disc in the DVD recorder. You can use the '
function. Please read 'Finalizing DVD+R's' in the chapter 'Managing disc
content'.
Recording
' appears on the TV screen. In the display,
' will appear on the
' appears
'