Magnavox MDV630R Owner's Manual page 35

a
b During 'Automatic channel search' the DVD recorder detects whether
an antenna or a cable TV signal is connected. If you have connected a
cable TV signal but found very few TV channels, you must search the
channels manually.
To do so, select '
If you select '
' ', channels 2-69 will be available. Select your type of
connection by pressing C repeatedly
' ', '
Confirm the setting with OK .
Press SYSTEM-MENU to go to the next menu. Press OK to start
channel search as prompted by the on-screen message. When the
channel search is complete, press SYSTEM-MENU repeatedly to
remove all the menus.
You can read about how to search for a TV channel manually in the following section 'Adding
and clearing TV channels manually'.
1
Turn on your TV. If required, select the TV's Audio/Video In (or
channel 3 or 4).
2
Press STANDBY m to turn on the DVD recorder. Press the
SYSTEM-MENU button on the remote control. The menu bar
will appear on the TV screen.
3
' using D or C .
Select '
4
Press B repeatedly B to select '
C .
5
Select line '
C .
6
Using B or A select the TV channel that you want to delete
or add.
7 Press C or D to choose '
8
Repeat steps
channels you want.
9
To save your channel selections, press OK .
Installing your DVD recorder
' insted of line '
' in step 6 and confirm with C .
', channels 1-125 will be available. If you select
' or ' automatically detects which one you have.
' using B or A then press
' or '
to until you have added/deleted all the TV
6 7
' and then press
'.