The factory setting is for channel 3. However, if you would like to
switch to channel 4, proceed as follows:
Press CHANNEL q while '
1
4) will appear on the display.
If you want to switch back to channel 3, press CHANNEL r .
2
'
' (channel 3) will appear on the display.
6
Switch your TV to the selected channel (channel 3 or 4).
The menu for language selection will appear on the screen.
a
b Check the cable connections.
b Is 'DVDR' (DVD recorder operation) lit up in the display?
If not, press the TV/DVD button until 'DVDR' is lit.
b Change between channel 3 and 4 on the TV.
7
This TV channel number must be used in the future for DVD
recorder playback.
Then, read the paragraph 'Initial installation' in the chapter 'Installing your DVD recorder'.
' is displayed. '
' (channel
Connecting the DVD recorder