Setup Procedure - Optoma H27 Service Manual

6-2

Setup Procedure

Step1.
Step2.
Step3.
Step4.
Step5.
*Notice : Confirm JP3 is "Close" status (EDID Mode).
JP3
Power Adapter
COM1
Connect Power Adapter with the fixture.
Connect P1 of the fixture with COM1 of PC/Laptop by RS232 cable.
Connect P2 or P4 of the fixture with VGA in port of H27 cable.
Connect P3 of the fixture with DVI port of DVI-DVI cable.
Plug Power Adapter to the fixture and connect the H27 Power Cord.
P2
P3
P1
VGA in port
P4
DVI port
6-2
marked as "Generic"
H27