Technical Specifications - Fishman TONEDEQ | AFX User Manual

Technical Specifications

Input impedance:
Input trim gain range:
Nominal Output impedance:
Maximum Output level:
Baseline noise:
Dynamic range:
Typical in-use current consumption:
Typical 9V battery life:
9V adapter:
Tone Controls:
Low cut:
Low control:
Mid control:
High control:
Compressor:
Threshold:
Ratio:
Phase switch:
Boost:
Dimensions:
Weight:
We reserve the right to change any of the the specifications and information in
this manual without notice.
10M Ohm
-6dB to +14dB
1k Ohm, Amp Output
600 Ohm, D.I. Output
+8dBV (onset of clipping)
-91dBV ( A-weighted )
97dB ( A-weighted )
37mA (62mA max.)
12 hours using alkaline battery
18 hours using lithium battery)
Fishman 910-R
or suitable filtered and regulated,
200mA type, tip = negative
40Hz, 80Hz, 160Hz
±14dB @ 100Hz
±12dB @ 700Hz, Q=1
±15dB @ 6.5kHz
Variable
2.3:1
Left position = non-inverting
Variable: +3dB to +9dB
5.6" D x 9.5" W x 2.2" H
142mm D x 240.8mm W x 55mm H
2.2lbs (1.0kg)
10