This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
INFORMATION (FOR CANADA)
RENSEIGNEMENT (POUR CANADA)
This Class B digital apparatus complies with Canadian ICES-003.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
POUR EVITER LES RISQUES D'INCENDIE OU D'ELECTRO-
CUTION, NE PAS EXPOSER L'APPAREIL A L'HUMIDITE OU
A LA PLUIE.
POWER SYSTEM (TK-C9201EG/TK-C9301EG only)
Connection to the mains supply
This unit operates on voltage of 220 V to 240 V AC, 50 Hz/60 Hz.
To prevent electric shock, do not open the cabinet.
No user serviceable parts inside. Refer servicing to qualified service
Information for Users on Disposal of Old Equipment
This symbol indicates that the electrical and
electronic equipment should not be disposed as
general household waste at its end-of-life.
Instead, the product should be handed over to
the applicable collection point for the recycling of
electrical and electronic equipment for proper
treatment, recovery and recycling in accordance
with your national legislation.
By disposing of this product correctly, you will help
to conserve natural resources and will help
This symbol is
prevent potential negative effects on the
only valid in
environment and human health which could
otherwise be caused by inappropriate waste
handling of this product. For more information
about collection point and recycling of this product,
please contact your local municipal office, your
household waste disposal service or the shop
where you purchased the product. Penalties may
be applicable for incorrect disposal of this waste,
in accordance with national legislation.
If you wish to dispose of this product, please visit our web page
http://www.jvc.eu to obtain information about the take-back of the
[Other Countries outside the European Union]
If you wish to dispose of this product, please do so in accordance
with applicable national legislation or other rules in your country
for the treatment of old electrical and electronic equipment.
©2012 JVC KENWOOD Corporation
(For U/E type)
The unit is to be powered by a DC 12 V or an AC 24 V
The unit is to be powered by a UL Listed DC 12 V or an
AC 24 V power supply. (For USA)
The AC 24 V and DC 12 V power supply shall conform to
the following: Class 2 only (For USA), Isolated power
supply only (For Europe).
This installation should be made by a qualified service
person and should conform to all local codes.
This installation shall be in accordance with the National
Electrical Code, ANSI/NFPA 70.
Any Mention in this manual of Alarm inputs have not been
evaluated by UL to be used for Burglar Alarm
Special technique is required when installing this product.
Please refer to your dealer for installation.
Rating label is pasted on of the camera unit.
JVC is not liable for any compensation if you drop the
camera due to insecure mounting by not following the
installation description. Pay careful attention during
When mounting this product to a ceiling or wall, select a
location strong enough to support the weight of this
camera. If the location is not strong enough to support the
weight, be sure to reinforce the ceiling or wall before
The camera may drop if the mounting screws are not
tightened securely. Check that the screws are tightened
appropriately and securely.
Do not install the camera near lighting fixtures of high
temperature, such as spot lights. It might result in failure