Small Font - Casio KL-G2 User Manual

24mm (1"),
Number
Format 18mm (
of Lines
wide
A
B
3
C
D
* Smaller printing with a frame.
Important!
You cannot specify the character size for a line of text when any one of the
conditions below exists.
• When 6mm (
1
/ ") wide tape is loaded in the printer
4
• When there are more than three lines of text
• When a character size is specifi ed for specifi c characters (page 34)
1.
Input text.
2.
Press .
3.
Select LINE and then press SET.
36 EN
1
12mm ( / ") 9mm (
3
2
/ ")
4
wide wide
1×1
1×1 -
1×1
1×1
1×1 -
2×2*
1×1
2×2* -
1×1
2×2*
1×1 -
1×1
4.
Select the format you want to use
3
/ ")
and then press SET.
8
-
-
Important!
Either of the events below will cause a line character size setting to be
-
cancelled automatically.
• Changing the number of lines
• Specifying the size of specifi c characters (page 34)
-

■ Small Font

Certain number of line (number of input lines or the number of lines in a
selected format) and tape width combinations may cause SMALL FONT to
become selected.
• A pointer will appear next to SMALL FONT on the right side of the display
when this happens.
• In the case of a free design label, the Imager will show a fractional value.
Important!
• Font and proportional settings become invalid while SMALL FONT is
selected.
• Text that has a character style or effect applied, as well as illustrations and
user characters may not print correctly while SMALL FONT is selected.
Selected format
Imager