Turning Power On And Off - Casio KL-G2 User Manual

Turning Power On and Off

■ To turn power on
Press ON.
• For information about how to adjust the display contrast and to change the
backlight setting, see page 51.
■ To turn power off
Press OFF.
• Check to make sure the printer display is blank.
Auto Power Off
Auto Power Off turns off printer power if you do not perform any operation for
about six minutes. When you need to use the printer again, press ON.
• Auto Power Off is disabled while the printer is being powered by the AC
adaptor and when it is connected to a computer.
Main menu
Creating Text for Printing
There are three ways that you can create text for printing.
• Create new text → Select NEW and then select the type of label you want
to create.
• Recall existing text →Select STORED DATA, select RECALL, and then
select the data you want to recall.
• Recall the text that was being input the last time the printer was turned off
(last session's data) → Select PREVIOUS DATA.
Important!
Selecting something other than PREVIOUS DATA causes the last session's
data to be deleted. To avoid loss of important data, you should save it to
printer memory (Storing Label Data, page 40) before selecting something
other than PREVIOUS DATA.
15 EN