External Tool Parts; Tool Specifications; Nail Specifications - DeWalt D51276-XE Instruction Manual

EXTERNAL TOOL PARTS

FIG. 1
D51276 15G. Angled Finish Nailer
360˚
TRIGGER
EXHAUST
LOCK-OFF
JAM CLEARING
LATCH
CONTACT
TRIP
NO-MAR
PAD
D51257 16G. Finish Nailer
360˚ EXHAUST
TRIGGER
LOCK-OFF
JAM CLEARING
LATCH
CONTACT
TRIP
NO-MAR
PAD
REVERSIBLE BELT
HOOK
TRIGGER
PUSHER
DEPTH ADJUSTMENT
WHEEL
DUAL LOAD MAGAZINE
REVERSIBLE
BELT HOOK
TRIGGER
DEPTH ADJUSTMENT
WHEEL
PUSHER
DUAL LOAD MAGAZINE
Definitions: Safety Guidelines
The definitions below describe the level of severity for each signal
word. Please read the manual and pay attention to these symbols.
DANGER: Indicates an imminently hazardous situation which, if
not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
CAUTION: Used without the safety alert symbol indicates a
potentially hazardous situation which, if not avoided, may result in
property damage.

TOOL SPECIFICATIONS

Height
Width
Length
Weight
Recommended Operating Pressure 70 - 120 psig (4.9 to 8.3 bar)
Air consumption per
100 cycles
Loading capacity

NAIL SPECIFICATIONS

D51257 16G. Finish Nailer
Nail Lengths 2" - 3-1/2" (50 mm - 90 mm)
Shank Diameters
Nail Stick Angles
1
D51257 16G. Finish Nailer D51276 15G. Angled Finish Nailer
10.7" (272.0 mm) 11.6" (294.1 mm)
3.5" (88.9 mm) 3.5" (88.9 mm)
11.8" (299.2 mm) 13" (330.2 mm)
3.9 lbs. (1.77 kg) 3.85 lbs. (1.75 kg)
70 - 120 psig (4.9 to 8.3 bar)
4.5 cfm @ 100 psi 6.0 cfm @ 100 psi
127 l/m @ 6.9 bar 170 l/m @ 6.9 bar
100 Nails 100 Nails
D51276 15G. Angled Finish Nailer
2" - 3-1/2" (50 mm - 90 mm)
.16 gauge 15 gauge
straight 34˚