Electrical Requirements - KitchenAid KUBL204EPA Use & Care Manual

Overlay Frame Dimensions—Rear View
1. Create a custom overlay frame using the dimensions shown.
³⁄₄
2 "
(7.0 cm)
¹⁄₂
"
(1.4 cm)
³⁄₄
2 "
⁷⁄₈
4 "
(7.0 cm)
(12.4 cm)
3"
(7.7 cm)
⁵⁄₈
4 "
³⁄₈
2 "
(11.7 cm)
(6.1 cm)
¹⁄₂
"
(1.4 cm)
³⁄₄
2 "
(7.0 cm)
Door Hinge Holes
The views of the top and bottom hinge pin hole show a right-
hand hinge. Mirror the image for a left-hand hinge.
We recommend using a C-clamp and two pieces of scrap
wood (front and back) to help reinforce the overlay frame
when drilling the hinge pin holes.
1. Using a ³⁄₈" brad point doweling drill bit, drill a hole, ¹⁄₄"
(6.35 mm) deep, into the top of the overlay frame for the top
hinge pin. Remove the excess wood, surrounding the hole, by
using the rotary tool to complete the hinge depression as
shown.
Top View
A
¹⁄₂" (13.5 mm)
Depth
¹⁄₄"
(7.0 mm)
A. Diameter ³
¾
23 "
(60.3 cm)
Top
¹⁄₂
3 "
(9.0 cm)
Hole
3"
¹³⁄₁₆
(7.7 cm)
17 "
(45.2 cm)
29
(75.8 cm)
³⁄₄
22 "
(57.8 cm)
¹⁄₂
3 "
(9.0 cm)
Bottom
¹⁄₂" (13.5 mm)
Front Surface
Back Surface
³⁄₈" (10.0 mm)
⁄₈
" (10.0 mm)
2. Using a ³⁄₈" brad point doweling drill bit, drill a hole, ³⁄₈"
(9,5 mm) deep, in the bottom of the overlay frame for the
bottom hinge pin. Remove the excess wood, surrounding the
hole, by using the rotary tool to complete the hinge
depression, as shown.
³⁄₈" ( 10.0 mm)
¹⁄₂" (13.5 mm)
¹³⁄₁₆
"

Electrical Requirements

Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Before you move your beverage center into its final location, it is
important to make sure you have the proper electrical
connection.
Front
¹⁄₄"
(7.0 mm)
³⁄₈" (9.5 mm)
Bottom View
³⁄₈"
Depth
( 10.0 mm)
Back Surface
Front Surface
A
¹⁄₂" (13.5 mm)
⁄₈
A. Diameter ³ " (10.0 mm)
³⁄₈" (10.0 mm)
³⁄₈" (10.0 mm)
Front Surface
WARNING
Electrical Shock Hazard
5