Table of Contents
Advertisement
78
Bluetooth Phone/Devices
Steering Wheel Controls
/
(Push to Talk):
Press to answer incoming calls,
confirm system information, and
start voice recognition.
Press and hold to start voice
recognition.
Infotainment System Controls
For information about how to
navigate the menu system using the
infotainment controls, see
Overview 0 3.
Using Voice Recognition
The voice recognition system uses
commands to control the system
and dial phone numbers.
To use voice recognition, press
/
on the steering wheel.
If you know the command you
would like to execute, say the
command. If the command is not
known, say Help while in any voice
recognition menu.
See Voice Recognition 0 61.
Noise : The system may not
recognize voice commands if there
is too much background noise.
When to Speak : A tone sounds to
indicate that the system is ready for
a voice command. Wait for the tone
and then speak.
How to Speak : Speak clearly in a
calm and natural voice.
Audio System
When using the Bluetooth system,
sound comes through the vehicle's
front audio system speakers and
overrides the audio system. Use the
volume bar during a call to change
the volume level. The adjusted
volume level remains in memory for
later calls. The system maintains a
minimum volume level.
Pairing a New Bluetooth
Device
1. Touch the Settings screen
button on the Home Page to
access the Settings menu.
Touch Bluetooth Device List.
If not grayed out, touching the
Phone screen button on the
Home Page will also access
the Bluetooth Device List if no
phone is connected. If another
phone is connected, touching
the Phone screen button on the
Home Page will access the
main phone screen.
2. Touch the Pair Device screen
button to start the process of
adding a new Bluetooth device
to the radio system.
3. Once Pair Device is touched,
the radio becomes
discoverable for three minutes.
A four or six-digit Personal
Identification Number (PIN)
appears on the display.
Advertisement
Table of Contents
