Table of Contents
Advertisement
30
Audio Players
File System and Naming
The song titles, artists, albums, and
genres are taken from the file's ID3
tag and are only displayed if present
in the tag. If a song title is not
present in the ID3 tag, the radio
displays the file name as the
track name.
Preprogrammed Playlists (CD
Models Only, DVD Models Do Not
Support Playlists)
The radio recognizes
preprogrammed playlists; however,
there is no editing capability. These
playlists are treated as special
folders containing compressed
audio song files.
USB Port
Playing from a USB
A USB mass storage device can be
connected to the USB port.
The USB port is in the storage area
located in the lower portion of the
center stack.
DC power of 5 volts is limited to
1 amp from this port. Devices such
as iPads that require greater current
will not charge from this port.
Two additional ports, capable of
charging an iPad and used for
charging only, are in the rear of the
center console.
USB MP3 Player and USB
Drives
The USB MP3 players and USB
drives connected must comply
with the USB Mass Storage
Class specification (USB MSC)
and support formats of FAT32,
FAT16, and HFS+.
Hard disk drives are not
supported.
The radio will not be able to play
back write-protected music.
The following restrictions apply
for the data stored on a USB
MP3 player or USB device:
Maximum folder structure
depth: eight levels.
Maximum number of MP3/
WMA files that can be
displayed: 10,000.
Playlist entries must be in the
form of relative paths.
The system attribute for
folders/files that contain audio
data must not be set.
To play a USB device, do one of the
following:
Connect the USB and it begins
to play.
Touch the USB screen button on
the Home Page.
Press SRCE to scroll until the
USB source screen is available.
Advertisement
Table of Contents
