Table of Contents
Advertisement
22
Radio
To install Stitcher:
On an Android phone or Android
Tablet, go to the Google Play
Store and search for Stitcher.
Install to the phone, not to the
SD card.
On an iPhone, iPad, or iPod
touch, go to the iTunes Store
and search for Stitcher.
Launching Stitcher
Connect the iPhone, iPad, or iPod
touch to the USB port, or connect
an Android through Bluetooth. For
first time use, set up the stations
before connecting to the vehicle.
The Stitcher icon will be available
on the Home Page.
The signal strength and battery level
meters indicate the conditions of the
paired phone. There may be
performance issues with this feature
when signal or battery levels
are low.
Launch Using an iPhone, iPod
touch, or iPad
1. Plug the device into the USB
port. The phone screen must
be unlocked.
2. To launch, do one of the
following:
Make sure the device is
unlocked so the Allow
button can be pressed on
the device.
Touch Stitcher on the
Home Page.
Press the SRCE button on
the radio faceplate or touch
the Source screen button
and select Stitcher from the
Source banner.
Press
/
and say
Stitcher or Play Stitcher.
If nothing happens when the
available Stitcher screen button is
touched, download the latest
Stitcher application to the device
and retry. Also, verify you are in a
good signal area.
Stitcher will always be highlighted
on the Home Page when an iPhone,
iPad, or iPod touch is connected
using the USB port. To use, log in to
your account.
If the Please See Device message
is shown, the login screen may
display on the device.
Launch Using an Android Phone
1. Pair the Android phone using
Bluetooth.
2. Use one of the following to
launch:
Touch Stitcher on the
Home Page.
Press the SRCE button on
the radio faceplate or touch
the Source screen button
and select Stitcher from the
Source banner.
Advertisement
Table of Contents
