Fujitsu SE700 Operating Manual page 74

Switching the SE700 / SE500 on and off
2. Switch on the MU
The power-on indicator (item 11 in
STAND-BY).
Switch on the rack console by pulling out and folding out the monitor, see
Ê
Press the On/Off switch on the MU (item 12 in
Ê
The power-on indicator lights up green. The MU switches itself on, conducts a system
test and starts the M2000 software. This takes a little time. Finally, on the rack console
you see the login window for the Linux desktop of the local console.
Call the SE Manager, e.g. after logging in on the local console via the browser of the
Ê
Linux desktop (in the "Computer" menu in the task bar) or via an administration PC
(default), see the "Operation and Administration" manual [5].
You can also switch on the MU remotely via the iRMC of the MU, see the "Operation and
Administration" manual [5].
3. Switch on the Server Unit SU /390
As the administrator or a privileged operator, switch on the Server Unit using the
Ê
SE Manager (menu Hardware → Server (SE<model>, Units tab, "Switch on" function),
see the "Operation and Administration" manual [5].
Alternatively you can switch the Server Unit on by pressing the POWER ON button on the
server's control panel (see
server's control panel displays no further error codes.
Then you can call an SVP console window in the SE Manager and start the BS2000 system
using PROGRAM LOAD FRAME: DETAIL-1.
When a POWER ON IPL is configured, the BS2000 system is loaded automatically (using
AUXILIARY FRAME: LOAD PRESET1).
Alternatively the IPL can also be initiated in the SE Manager (see the Systems menu,
"Operation and Administration" manual [5]).
i
74
page
The control panel and SVP frames of the Server Unit are described in the "Server
Unit /390" Operating Manual [2].
figure 10 on page
figure 10 on page
42). The system is ready when the status indicator on the
Switching the server on and off
49) lights up orange (POWER
49).
page 31.
U41858-J-Z126-1-76