Epson TM-T88V-DT User Manual page 41

4
The "Status Notification" / "Status Notification Settings" screen appears.
Set the following items and click [Apply] / [Submit].
For TM-i Firmware Ver.4.0 or later
Item
Status Notification
ID
Password
URL
Interval(s)
Authenticate Server
For TM-i Firmware Ver.3.x or earlier
Item
Status Notification
ID
Password
URL
Interval(s)
Select the [Enable].
Set ID for the server-side program to identify TM-i. This ID becomes the user
ID used for Digest access authentication. The set value will also be passed
as an ID parameter value for the form data posted to the server.
Not required for the sample program.
Set your password used for Digest access authentication.
Not required for the sample program.
Specify the Test_print.php address of the Web server.
Example: http://[IP address of the Web Server]/Test_status.php
Click the [Access Test] button to check if the address is accessible.
Set the request interval.
Request interval refers to the interval between the end of the previous
communication and the start of the next communication.
Sets whether the server authentication is performed with the registered
certificate when accessed through https.
Select the [Enable].
Set ID for the server-side program to identify TM-i. This ID becomes the user
ID used for Digest access authentication. The set value will also be passed
as an ID parameter value for the form data posted to the server.
Not required for the sample program.
Set your password used for Digest access authentication.
Not required for the sample program.
Specify the Test_print.php address of the Web server.
Example: http://[IP address of the Web Server]/Test_status.php
Click the [Access Test] button to check if the address is accessible.
Set the request interval.
Request interval refers to the interval between the end of the previous
communication and the start of the next communication.
Chapter 4
Description
Description
Status Notification
4
41