Restriction
❏ If power is restored the device or the cover is open during printing, printing may not occur properly.
❏ To turn the device power off and on, be sure to allow an interval of five seconds or more between power
off and on.
❏ Use a switching hub to connect the device.
If no switching hubs are used, the device in online status is more likely to be judged as offline depending
on the traffic condition.
❏ Drawer open operates when the TM intelligent printer is in online status (when the roll paper is loaded
and the roll paper cover is closed).
If you are using a TM-i (TM-i firmware Version 3.0 or later)/ TM-DT (TM-DT software Version 2.2 or later), if you
designate forced transmission mode with ePOS-Print XML, it will operate offline.
❏ When the specified timeout time has passed after printing starts, the printing is canceled, but the data
recognized by the printer before print cancelling process starts is printed.
14