Avtech HDM02 User Manual

Hdmi switcher

350Z

All lead-free products offered by the company comply with requirements of the European law on the

Restriction of Hazardous Substances (RoHS) directive, which means our manufacture processes and

products are strictly "lead-free" and without the hazardous substances cited on the directives.

The crossed-out wheeled bin mark symbolizes that within the European Union the product must be

collected separately at the product end-of-life. This applies to your product and any peripherals

marked with this symbol. Do not dispose of these products are unsorted municipal waste. Contact

your local dealer for procedures for recycling this equipment.

CE Mark

This apparatus is manufactured to comply with the radio interference.

The company does not warrant that this manual will be uninterrupted or error right to revise or remove

any content in this manual at any time.

HDM02_V1.1

Table of Contents

Need help?

Do you have a question about the HDM02 and is the answer not in the manual?

Page 1 350Z All lead-free products offered by the company comply with requirements of the European law on the Restriction of Hazardous Substances (RoHS) directive, which means our manufacture processes and products are strictly “lead-free” and without the hazardous substances cited on the directives. The crossed-out wheeled bin mark symbolizes that within the European Union the product must be collected separately at the product end-of-life.
Page 2 GENERAL DESCRIPTION This HDM02 is the perfect way to get ultimate flexibility and integration out of your surveillance system. You can plug up to four HDMI sources (e.g., NVR or DVR) and USB controls into the Matrix for single output display and control. Also, HDM02...
Page 3 Step 2: Plug four USB cables into each USB port of NVR / DVR and the four mouse signal output ports of HDM02. Step 3: Connect the monitor with an HDMI cable to the video output port of HDM02. Note: The monitor has to be a HDMI monitor with 1080p 60fps format to display correctly.
Page 4 OPERATION You can control the monitor display with your mouse as below: Single channel switch  Sequence mode switch and duration setup  Note: You need to enter the sequence mode and double left-click to switch duration time of 5, 10, 15 and 20 seconds. The default duration time is 5 seconds.