Table of Contents
Advertisement
Bottom right grille
In general, the cooling fins be‐
hind the grille on the bottom right do
not need cleaning. They should only
be cleaned if the drying process is
taking an exceptionally long time due
to a very high level of dust or fluff in
the room in which the dryer is loca‐
ted.
First open the plinth filter panel on
the left from underneath.
Insert a spoon handle underneath the
grille.
Lever off the grille at the top (1.).
Lever off the grille at the bottom (2.).
Open the grille out to the right (3.) ...
... and pull it, together with its 3
hooks, forwards to remove it from the
front of the dryer.
Problem solving guide
Danger of injury. Do not touch
the cooling fins. You could cut your‐
self.
Use a vacuum cleaner with a
dusting brush attached to clean the
cooling fins. Only pass the vacuum
cleaner brush over them lightly, with‐
out applying any pressure.
Take care not to bend the cooling
fins out of shape or to damage them.
Carefully vacuum up any visible fluff
or dirt.
Insert the 3 hooks of the grille into
the appropriate holes in the front of
the dryer.
Replace the grille by pressing it firmly
at the top and bottom of the left side.
61
Advertisement
Chapters
Table of Contents
