Bottom Right Grille - Miele TKG 440 WP Operating Instructions Manual

Heat pump dryer
Table of Contents

Advertisement

Bottom right grille

In general, the cooling fins
behind the grille on the bottom right
do not need cleaning. They should
only be cleaned if the drying process
is taking an exceptionally long time
due to a very high level of dust or
fluff in the room in which the dryer is
located.
 First open the plinth filter panel
(bottom left).
To remove the grille, the catch behind
it needs to be released using a spoon
handle.
 Insert a spoon handle behind the
grille in the middle.
 Press the spoon handle against the
catch and lever the grille open.
 Remove the grille.
Problem solving guide
Danger of injury. Do not touch
the cooling fins. You could cut
yourself.
Use a vacuum cleaner with a
dusting brush attached to clean the
cooling fins. Only pass the vacuum
cleaner brush over them lightly,
without applying any pressure.
Take care not to bend the cooling
fins out of shape or to damage them.
 Carefully vacuum up any visible fluff
or soiling.
 Re-insert the 3 hooks on the grille
into the appropriate holes in the front
of the dryer.
 Press the grille firmly back into
position by pressing it in at the
middle on the left.
57

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents