32 Recording One Channel/Watching Another
1
Press the VCR button.
2
Start a recording (see page 31).
3
Press the VCR/TV button to put the VCR in TV position. The
VCR light will disappear from the VCR's display panel.
4
Press the TV button, then press the CH(annel) Up/Down
or Number buttons to choose the channel you want to watch
at the TV. Or, use the TV remote control to select the channel
you want to watch.
5
To return to the channel being recorded, press the TV button,
then use the Number buttons to select channel 03 or 04
(whichever channel the CH3/CH4 switch on the back of the VCR
is set to).
Or, if the VCR remote control doesn't operate your TV, use the
TV remote control to select channel 03 or 04.
6
Press the VCR button.
7
Press the VCR/TV button to put the VCR in VCR position.
The VCR light will appear on the display panel. The channel being
recorded will appear on-screen.
8
Press the STOP button to stop the recording.
1
6
&
CBL/DSS
VCR
TV
POWER
VCR PLUS+
PAUSE
/ENTER
/STILL
8
SLOW
F.ADV
STATUS/EXIT
CLEAR
MENU
V
C
VOL
CH
V
C
1
2
3
4
5
6
7
8
9
100
0
A.CH
2
INDEX
SKIP
REC/OTR
SEARCH
SEARCH
VCR/TV
SPEED
MEMORY
EJECT
X2 PLAY
VAR.SLOW
TRACKING
MUTE
TIME SEARCH REC END SEARCH
JOG & SHUTTLE
Helpful Hints
• If your remote control operates your
TV, press the TV button, then use
the CH(annel) Up/Down buttons on
the remote control to select TV
channels. Details are on page 20.
• If you use a Cable Box or Satellite
System hookup, you may not be
able to watch one channel while
recording another. See pages eight-
nine for details.
• If you don't receive channels, check
your hookups, then follow the
instructions above carefully.
4
&
5
3
7