Planet WNL-U556M User Manual page 26

 Computer-to-computer
(ad-hoc) Network
 Channel
 Network Authentication
 Data Encryption
 ASCII / PASSPHRASE
 Key Index
 Network Key / Confirm
Network Key
 EAP Type / Tunnel /
Provision Mode
 Username / Identity /
Domain / Password
 Certificate
 PAC
Please click "OK" when ready
Step 5. Wireless adapter will attempt to connect to access point; this may require a few seconds to
minutes. When the "Status" become "Associated", your computer is connected to access
point you selected. Click "Close" to close configuration window.
SSID is not hidden and grayed out. If SSID is hidden, you
have to input the correct SSID yourself.
Check this box if you wish to connect to another computer /
network device by the ad-hoc method. When not accessing to
wireless access point, you have to check this box.
Select wireless channel for the ad-hoc connection. This option
only appears when you're using the ad-hoc connection.
Select the network authentication type from the drop-down
menu. This setting must be identical with the setting of
wireless access point you wish to connect to.
Select the data encryption type from the drop-down menu.
This setting must be identical with the setting of wireless
access point you wish to connect to.
When the encryption type is "WEP", it's required to input a set
of "passphrases" to connect to wireless access point.
Checking "ASCII" or "PASSPHRASE" depends on the security
setting of access point, and input it in the box; if you select
"PASSPHRASE", you also need to select the length of the
key. The passphrase must be identical with the setting of
wireless access point you wish to connect to.
Select WEP key index. For most of access points you can
select "1", but please refer to the setting of the access point.
When the encryption type is "WPA" or "WPA2-PSK", it's
required to input a set of "passphrases" to connect to wireless
access point. Please input the same passphrase in two boxes
for confirmation.
When the authentication type is any of 802.1X, you have to
select the EAP type, tunnel, and provision mode from the
dropdown menu. This setting must be identical with your
802.1x authentication server.
Please input 802.1x related authentication information here.
If certification is required to authenticate with 802.1x
authentication server, please select a local certificate from the
dropdown list.
Check this box and PAC (Privilege Access Certificate) will be
automatically selected.
.
-26-
300Mbps 802.11n Wireless USB Adapte
r
WNL-U556M